How to Install RAM

TO INstall DDR2 SDRAM

1. Wear an antiseptic wristband or hold a metal part of the chasis before touching any of the system componets.
2. Shut down the computer and disconnect the power cable from SMPS and peripheral devices attached to it.
3. Remove the computer cover
4. Remove the cards and internal components such as sound card or graphic card near the slot where RAM has to be placed. This helps to get easy access to the RAM sockets.
5. Hold the DDR 2 SD RAM module by the ends without touching the pins or chips .
6. Insert the module straight so that it is perpendiculas to the motherboard .
7. Close the side clips on DDR2 SDRAM.
8. Ensure that the clips are locked .
9. Replace all cards and internal components in a computer.
10. Reconnect the monitor, keyboard and mouse, but do not put the cover.
11) To check the amount of RAM, turn ON the computer. The first screen displays the amount of RAM installed or tou can check this from the BIOS settings.
12. If the amount of RAM is not right then turn off the computer and take out the DDR2 SDRAM module again.
13. Try to put it back in another sloy and reboot the computer.
14. shut down the computer and disconnect the peripherals again.
15. Put the cover and reconnect all the peripherals.